Many house owners and building owners use the carpets and rugs to decorate the room. They are warmer to the feet in the winter and softer, fluffy for the feet during summer.
But kids, guests and pets in the house make them dirty and hence they become allergen attractors in the room. It is very important to deep the carpet regularly to maintain the hygiene level of the house and the people living in it. This article is about how to clean the carpet using pressure washer.
For the carpet to last longer, give it regular cleaning at home and deep cleaning by the professional every once or twice in a year. But perfection near to professional cleaning can be achieved by cleaning the carpet and rugs with the pressure washer. They give sparkling clean look like a new one at home.
There are different types of pressure washers in the market. Make sure to use the right one to clean the carpet to ensure not to damage the carpet instead of cleaning it. Not all the carpets are made for power washable materials. Some are spot cleaned, dry cleaned and some laundered.
1. Choose the cleaning area:
Do not power wash the carpet inside the house. Make sure to find a cleaning area where the carpet can be laid out to be cleaned. A wooden deck or concrete side walk would be the best place to do so.
2. Preparation:
To start the cleaning process, lay the carpet upside down. Sweep the carpet thoroughly on both sides to remove loose dirt. Remove the bigger particles, hair, stain crust and solid particles from the carpet. This allows the pressure washer to clean the immense dirt excellently.
3. Using right materials:
The cleaning chemicals used are very important to give a positive result. Some detergents may not suit the carpet and cause discoloration. So, be cautious of the cleaning agent being used. Check for the instructions on the carpet before cleaning it.
4. Check the pressure washer:
Before starting the cleaning process, ensure to check the pressure washer machine to ensure it is in working condition. Check if it is well oiled, has all the necessary attachments and accessories needed to operate the machine. Also ensure to check if the hose is well connected to the machine and the water source.
5. Start washing gently:
It is important to use the cleaning aids to sanitize the carpet. Pull the trigger on the washer to apply the sufficient pressure on the carpet, from right distance. Do not hold the washer too near or far from the carpet, as the pressure may damage the carpet. Start cleaning from one end of the carpet to remove the accumulated dirt and dust.
6. Rinse thoroughly:
After the carpet is cleaned with the cleaning agent, ensure to rinse it thoroughly to remove the soap. Ensure no soap is left. Repeat the rinsing process to make sure it is cleaned thoroughly.
7. Drying Area for carpet:
When the cleaning is finished, find the perfect place to dry the carpet, depending upon the weight and size. Ensure that there isn’t any dirt or dust in the area where the carpet is to be dried. Keep in mind that the wet material tends to attract more dirt. Expose the carpet to the sunlight and wind to get the carpet dried faster.